Tire inserts 10th scale

Since we made the smaller scale tire inserts, and had so much success we’ve move into the 10th scale space.

The TPU we’re using and recommend everyone else use is – https://amzn.to/40X6C68; please use the link as it helps us out!

The first 10th scale insert released can be found here. It was designed for a Vanquish Pheonix tire/wheel combo, but I’m sure will work for other applications.

117mm – light
Measurements are:
OD – 117mm
ID – 56mm
Width – 30mm

110mm – light
Measurements are:
OD – 110mm
ID – 55mm
Width – 30mm

100mm – heavy
Measurements are:
OD – 100mm
ID – 55mm
Width – 33mm

105mm – medium
Measurements are:
OD – 105mm
ID – 55mm
Width – 30mm

110mm – light – Vanquish Falken Wildpeak M/T
Measurements are:
OD – 110m
ID – 55mm
Width – 40mm

Light – Deep Woods CR Duratrax – C3 – RC Tire Inserts
Measurements are:
OD – 110mm
ID – 55mm
Width – 40mm

Medium – Proline TSL Swampers 1.9
Mesurements are:
OD – 112mm
ID – 55mm
Width – 42mm
material – TPU
nozzle size – .8mm
NOTE: you NEED to use a .4mm or .8mm nozzle only otherwise the print will NOT work

Lite – Proline TSL Swampers 1.9
Mesurements are:
OD – 112mm
ID – 55mm
Width – 40mm
material – TPU
nozzle size – .8mm
NOTE: you NEED to use a .4mm or .8mm nozzle only otherwise the print will NOT work

Print time is roughly 24 hours per tire on my tired old ender v3 pro that is Bowden, if you have direct drive it should be faster and a better looking print.